Installation

Installation is easy and can be accomplished in less than 10 minutes typically.

There are 5 color-coded wires used to connect GreenFan.

1) Turn off the power to your heating/cooling system.

2) Take the cover off your furnace/packaged system.

3) Connect the red wire from GreenFan to the RC or RH connection on your furnace control board.  This is the same point the red wire from the thermostat connects.  Leave all other connections to this terminal in place and just add the GreenFan red wire.

4) Connect the white wire from GreenFan to the W connection on your furnace control board.  This is the same point the white wire from the thermostat connects.  Leave all other connections to this terminal in place and just add the GreenFan white wire.

5) Connect the blue wire from GreenFan to the terminal labeled "C" on the furnace control board. Leave all other connections to this terminal in place and just add the GreenFan blue wire.

6) Unscrew the thermostat green wire from the furnace G terminal and disconnect the green wire.

7) Use a wire nut to connect the black wire from GreenFan to the green wire from the thermostat.  

8) Connect the green wire from GreenFan to the furnace G terminal where the thermostat green wire used to go.

9) Replace the furnace covers and you are done!

 

Copyright Bear Mountain Design, INC 2010